Water Chiller for Hydroponics, 1/3 HP, 800W, Up to 79 Gal, Titanium Coil
Description
Keep your roots cool, oxygenated and rot-free, all summer long.
Warm nutrient solution holds less dissolved oxygen and invites root rot. The Artisun 1/3 HP Water Chiller holds your reservoir at the temperature you set, so RDWC, DWC and Dutch bucket systems stay in the 65–68°F zone where roots thrive, even when the grow room runs hot under the lights.
Why growers choose it
- Up to 800W (≈2,730 BTU/hr) of cooling from 1/3 HP compressor, sized for reservoirs and RDWC systems up to 79 gal (300 L).
- Pure titanium heat-exchange coil won't corrode or leach metals into your nutrient solution. Safe for fresh water, nutrient mixes and salt water.
- Digital set-and-forget controller. Dial in your target temperature and the chiller cycles itself on and off to hold it.
- R290 natural refrigerant. High efficiency with near-zero global warming potential, so you get more cooling per watt than older R134a and R410a chillers.
- Runs on a standard outlet. 110V / 60 Hz and only 3.2 A, so it shares a 15 A grow-room circuit with your lights and pumps.
- Ready to plumb, two ways. Connect directly to Artisun's 8-gallon 2-site and 4-site RDWC Systems using the included 12 ft of 3/4" reinforced tubing, PVC fittings, couplings, hose clamps and PTFE thread-seal tape. For aquariums, standalone reservoirs and other applications, use the included submersible pump, 1/2" tubing and connectors. Inlet and outlet are 25 mm male threaded.
- Compact footprint. 11.5 × 11.5 × 13 in, small enough to sit beside your tent.
- Backed by Artisun. U.S.-based support from the team that designs our RDWC and DWC systems
Pairs with: Artisun 8-gallon 2-site and 4-site RDWC Systems (hookup hoses included), plus other Artisun RDWC, DWC and Dutch Bucket Systems.
In the box: 1/3 HP water chiller, 12 ft of Artisun 3/4" 5-layer reinforced RDWC hookup tubing with PVC fittings, couplings, hose clamps and PTFE thread-seal tape; submersible pump with 1/2" tubing and connectors for other applications; user manual.
Specifications
|
Spec |
Value |
|---|---|
|
Compressor |
1/3 HP |
|
Cooling capacity |
Up to 800 W (≈ 2,730 BTU/hr) |
|
Recommended reservoir |
Up to 79 gal (300 L) |
|
Cooling method |
Compressor refrigeration |
|
Refrigerant |
R290 |
|
Heat exchanger |
Pure titanium coil |
|
Power |
100–110 V / 60 Hz, 3.2 A rated |
|
Controller |
Digital, set-point temperature display |
|
Unit dimensions |
29 × 29 × 32 cm (11.4 × 11.4 × 12.6 in) |
|
Package dimensions |
35 × 35 × 43 cm (13.8 × 13.8 × 16.9 in) |
|
Net weight |
18 kg (39.7 lb) |
|
Included |
RDWC kit: 12 ft Artisun 3/4" reinforced tubing with PVC fittings, couplings, hose clamps and PTFE thread-seal tape (fits Artisun 8-gal 2-site and 4-site RDWC). Universal kit: submersible pump, 1/2" tubing and connectors |
|
Inlet / outlet |
25 mm male threaded |